Can earthquakes from injected wastewater be predicted?
ASU scientist receives a grant to find out how much injected wastewater it takes to make an earthquake
One of the fastest-growing techniques for producing oil and gas today involves widening cracks in hydrocarbon-bearing rock formations underground. The cracks are opened by forcing a mixture of water, sand and chemicals into them in a process commonly called fracking.
The resulting fluid is processed to remove the oil and gas it has freed from the rock, and a wastewater residue called brine is left. The brine, which is toxic, is then disposed of by injecting it into deep layers of the Earth capped with rocks that keep it from reaching the surface.
But the injection process, which is carried out far away from the fracking sites, can induce earthquakes. These may be large enough to damage buildings and other structures at the surface where the brine injection is done.
To gain an understanding of how brine injection causes earthquakes, Arizona State University scientist Manoochehr Shirzaei has received a $1 million grant (over three years) from the U.S. Department of Energy to model the injection process and its subsequent effects.
"Our goal is to find a physics-driven mathematical relationship between the amount of brine injected, its depth, and any effects at the surface," said Shirzaei, an assistant professor in ASU's School of Earth and Space Exploration.
"These effects can include earthquakes and also deformation — uplift — of the ground surface," he said.
First focus: Oklahoma
Initially the study will focus on Oklahoma, a state that has been a center for brine injection activities and which has logged a detailed record of seismic events. These include a magnitude 5.8 earthquake in September 2016.
"We will also consider expanding the research to include brine injection sites in Texas, California, Ohio, Kansas, and Colorado," Shirzaei said.
Seismic records are readily accessible for the study from the U.S. Geological Survey, and quantities of injected brines are, by law, made publically available by the companies involved.
Contrary to widespread public ideas, the fracking process to extract oil and gas causes little or no seismic activity. Instead, earthquakes and seismic damage to structures come from injecting large amounts of wastewater ("brine") into deep rock formations where geological faults can be activated by the injected brine.Diagram: Manoochehr Shirzaei/ASU
Seismic activity (right scale) occurs a decade or more after wastewater has been injected (left scale) because it takes a long time for the injected wastewater to activate deeply buried faults in the bedrock. The number of quakes corresponds roughly to the volume of injected wastewater, but the relationship is not exact. ASU research is seeking to make it more predictable.Diagram: Manoochehr Shirzaei, Guang Zhai/ASU
A third element in the modeling is to include any deformation of the ground level. This is usually hard to measure because the effects are small and spread over a wide area. However, the use of interferometric synthetic-aperture radar (InSAR) data from orbit allows precise measurement of millimeter-scale uplifts over areas that are miles across.
Shirzaei explains, "We are looking to correlate injected wastewater quantities, measured deformation, and previous seismic activity to develop a model that can predict the likely effects of brine injection activity in a given area."
Because extraction of oil and gas is so important to a modern economy, Shirzaei expects the study will benefit a variety of stakeholders.
"The general public is the most important because they may be exposed to potential injury and damage," he said. The list also includes oil and gas producers, brine injection companies and geothermal energy providers.
"In addition, we expect the study will benefit land-management, regulatory, and permitting agencies," Shirzaei said. "Plus emergency managers and responders, building owners, insurers, mortgage holders and research scientists."